Official Site of CorKey Control Systems.
 
THE 800 CARD-OPERATED CYLINDRICAL LOCK
 
GENERAL FEATURES 
 
Card holds-in
Slot returns to insertion position (except Classroom Function #1)
Removable front knob for quick service or exchange
Slot can be positioned at top, bottom or to the side (except Classroom Function #1)
With side slot, lock is reversable for mounting in either right or left hand door
Simple installation
Fits existing cylindrical lock door holes
Uses invisibly coded stainless steel or plastic CorKey cards
Very large masterkeying capability
Only 3 seconds to change "TriSec" ™ codes from outside the lock
Deadlocking latch back-sets are: 2 3/8" (60mm), 2 3/4" (70mm), 5" (127mm)
Door automatically locks when closed
Various functions and finishes
Inside knob always opens door in all models.
 

(Flat back rear knob cover has been superceded by a rounded cover)

The 800 Series accepts the Corkey LEVERCARD TM. a long card which when inserted into the side slot of the lock acts like a handle so a light push on the top end or a pull on the attached key ring will rotate the knob to unlock the door. For use by children, the elderly or disabled.

 
Additional Special Functions and Features:
 
MODEL 800 HOTEL FUNCTION
GUEST ROOM LOCK:
 
 
Operation of latch by Guest and Staff
Master cards
Double locking excludes all cards
Occupancy indicator when double locked
Override by Emergency card
When inside knob button pushed, turning
inside knob or closing door releases button
Management can double lock with special
key

MODEL 802 STOREROOM
FUNCTION:
 
 
Front knob locked at all times, card must
be used to unlock
MODEL 804 CLASSROOM
FUNCTION #1:
 

Key in outside knob locks or unlocks
lockset.
Key may be withdrawn in either mode.
#2: This function can also be achieved by using a Storeroom function lockset and a special CorKey to set the lock to either Locked or Unlocked modes. Called the "SET/RELEASE" Key, inserting one side "Sets" the lock to UNLOCK mode. Inserting the same key reversed "Releases" the lock back to Locked mode. Specify "Set/Release" if desired.
 


corkey.com
Main | Company Profile | Video Intro | Applications | Products | Publications | Contact Us

Copyright © 2013 CorKey Control Systems. All Rights Reserved