CorKey Control systems 300 Series

Official Site of CorKey Control Systems.

301

CORKEY CARD-OPERATED ELECTRIC SWITCH LOCK
FOR SURFACE MOUNTING.

Case cannot be opened unless valid card inserted due to
mechanical interlock feature.
Mounts directly on surface, or on electrical junction box in wall.
TriSec™ variable code feature available for instant code
changing to 15 other codes from outside the case.
Can be used in systems with all other Corkey Locks.
Case has space inside for: Custom designed circuit boards for special uses; Alarm control circuits; Or other types of
switches or relays.
Available with switch either alternate action (push card in
for "ON", push again for "OFF") or momentary action.
Hold in card for either 'ON" or "OFF"depending on wiring
of switch.
Uses stainless steel or plastic Corkeys.
Switch rated at 3 Amps NON-INDUCTIVE load. To operate
higher amperage non-inductive or ANY inductive load,
internal switch is used to actuate external relay or
electronic circuit (not supplied).

SPECIFICATIONS:

Case: Grey finish metal case including removable cover and inside fitted black mounting

plate, 70mm x 120mm x 25.5mm. Optional grey finish wall mount base plate for

extra weather protection, 80mm x 128mm x 10mm. Dimension of case with

base plate: 80mm x 128mm x 35mm.

Internal Code Lock:

Contains Corkey magnetic card reader compatible with all other Corkey mechanical

locks.:

Switch: DESCRIPTION

Momentary action

Alternate action

CAPACITY: NON INDUCTIVE LOAD
125VAC. 3A
125VAC, 3A

Options:

S Standard code (uncoded)
add to

T TriSec code (uncoded)
model #

M Momentary action switch

A Alternate action switch

B Wall mount base plate
D Factory demo code
R Random code
M Master keyed per customer requirements

TMLED Internal DPDT Relay and adjustable delay circuit to keep actuated

device energized for a period of time from 1 second to 30 seconds.

Corkey Types:

CK127PL
Plastic long

CK127
Stainless steel

CK127P
Plastic standard size

Coding of 301 series switch locks and Corkeys is done by your dealer, or encoding equipment may be obtained for customer use.

ELECTRICAL SWITCH LOCK - 300 SERIES

For operation of: Electric Door Releases, Alarm Shunts, Industrial Equipment, Vehicle Gates, Tennis Court Night Lights, Whirlpool Baths, Office Photocopy Machines, Elevators, etc. Variable Code (TriSec) can be incorporated into any of the following., by adding "T" to the model number.

MODEL 300S

Surface Mount with threaded rods through the wall.

MODEL 300F

Flush mounted with threaded rods through the wall

MODEL 300W

Weather resistant housing for post or wall mounting

MODEL 300WF

The key lock removable front panel only

OTHER MODELS - ELEVATOR CONTROLS

Model 300A modules are coded differently for each floor. CorKeys are coded for floors, any group of floors, and a Master. Variable Code Modules 300AT provide instant code change when tenant vacates.
Examples of mounting switch locks on elevator panels are shown below.
The panels are usually custom made by the elevator company.
Inserting a CorKey card closes an internal switch to call the elevator or direct it to a floor.


Sixteen Floor Elevator Panel	Reverse Side of Panel Showing Mounting of 16 Model 300A Electric Switch Locks.	One CorKey lock controls the Elevator. When the Proper CorKey is Inserted in the slot at the top, any Floor Button Can Be Pushed.	Reverse side of a CorKey Floor Call Button Station. One or Two Modules Required

^Back to top

<<Back to main